This project is an offshoot of 3 of my earlier projects - 'Coupling a commercial VHF handheld to an external antenna' , 'Fox Hunt Attenuator' & 'UHF on a VHF Rig'.
Parts required are a couple of Rubber Ducky Antennas, suitable connectors, an enclosure and a OA5 diode.
![]()
Also needed are a MF signal source, a VHF signal source, 2 VHF handhelds & a UHF hand-held.
In-band & cross-band repeater operation is easily demonstrated using the handheld rigs.
The range is limited to the area inside the shack.
_______________________________![]()
![]()
![]()
Parts required are a couple of Rubber Ducky Antennas, suitable connectors, an enclosure and a OA5 diode.
Also needed are a MF signal source, a VHF signal source, 2 VHF handhelds & a UHF hand-held.
In-band & cross-band repeater operation is easily demonstrated using the handheld rigs.
The range is limited to the area inside the shack.
_______________________________